COTTON BOLL STRIPER

COTTON BOLL STRIPER

Description

COTTON BOLL STRIPER

 

General
Applications For the collection of bolls from the remaining cotton crop after the last picking
Type Tractor front-mounted
Tractor Power 50 + hp
Working Width 2640 mm
Overall Dimensions
Length 1180 ± 50 mm
Width 2725 ± 100 mm
Height 760 ± 20 mm
Material Specifications
Main frame M.S. box 75 x 43 x 6 mm, 02 Nos. side supports of M.S. box 42 x 42 x 6 mm, 02 Nos. center supports of M.S. box 50 x 50 x 6 mm
M.S. angle 38 x 38 x 4 mm welded on top and M.S. flat 38 x 4 mm welded on the bottom
Hitch attachment 02 Nos. M.S. rectangular box 75 x 43 x 6 mm, 920 mm long and 100 mm tapered at ends
Stripper Frame M.S. box 40 x 40 x 6 mm bolted with 12 Nos. of bolts of size 12 mm bolted with the main frame, 02 Nos. of pins 18 mm dia. for support
14 gauge M.S. sheet, welded at front and sides
Stripes 762 x 50 x 4.5 mm, T.iron welded with stripper frame with front tapered 120 mm and 4 mm tip size
M.S. sheet 14 gauge 250 mm wide, welded on the rear end of stripper frame
Tractor Attachment (Front) 25 mm thick M.S. plate bolted with tractor frame, 9 mm M.S. plate welded for support pulley
M.S. box 50 x 50 x 6 mm with adjustment holes
M.S. plate 75 x 16 mm attached with the main frame through 25 mm pins
Pulley for Wire Rope 04 Nos. 90 mm dia., flexible wire rope dia. 10 mm
Rear hydraulic link L shaped 460 x 235 mm, made of 50 x 6 mm M.S. angle hinged at the place of lower links with wire rope tightener
Miscellaneous
Paint Double coat with primer after the surface finish
Nuts and bolts To be tightened with spring washers
Minor modifications To be carried out free of cost if required
Warranty Free: 1 year for parts and service

Reviews

There are no reviews yet.

Be the first to review “COTTON BOLL STRIPER”

Your email address will not be published.