For sowing of wheat crop in rice stubble field after combine harvesting
Type of Machine
Tractor rear mounted
Linkage type
Car-II
Number of rows
10
Row spacing
200 – 225 mm adjustable
Seed and Fertilizer box
Placed above the main frame and fixed with rotor side plates
Seed and Fertilizer box capacity
60 kg each
Universal shaft
Provided
Effective field capacity
1.0 arce/h
Field efficiency
≥ 65 %
Overall Dimensions
Overall Width
2325 mm ± 20 mm
Working Width
1990 mm ± 20 mm
Overall Length
1340 mm ± 15 mm
Height
1280 mm ± 10 mm
Weight (Approx.)
700 kg
Material Specifications
Main Frame
M.S. box 85 × 85 × 6 mm welded with M.S. plate on both ends and bolted with side sheets
Side plates
8 mm M.S. plate on both sides
Rotor Shield cover
3 mm M.S. sheet welded with side plates, angle iron box on the front side, and M.S. strip at the back side
Rotor (drum) with shaft
M.S. pipe 1960 mm long, the outer diameter of 140 mm and 5 mm thick fitted with bubs and shafts of 40 mm diameter for mounting bearings
Cutter blade/flails
20 pairs Y type or U-type (40 blades) 2-knives welded with bush and pivoted with high tensile bolt 12 mm with lock nuts on the rotor in 4 rows at alternate intervals
Knife size
185 mm × 50 mm × 7 mm (spring steel HRC ≥ 40) sharpened edge on both sides
Tines and shanks
10 tines semi-circular in shape made of M.S. plate 16 mm at the sharpened front face, 5 mm thick M.S. sheet for furrow opener with carbon steel tips (HRC > 50) or T-type opener welded on the cutting edge
Tine clamps
20 U-shaped spring steel clamps of 10 mm diameter with nut and spring washer
Depth control
02 steel wheels or rubber wheels, the outer diameter of 340 mm or as per manufacturer’s standard for tines depth control
Power transmission
Gearbox 1:1.72, 1200 to 1350 RPM, and transmission shaft of 60 mm diameter covered in the casing. Triple grooved pulleys at transmission and rotor shaft with C-type bolts with proper belt adjuster. M.S. 16 gauge sheet cover for belts.
Seed-cum fertilizer box
M.S. sheet 18 gauge 2335 mm long trapezoidal shape divided into two box halves, both side width 510 mm, height 250 mm
Boxes lids
M.S. sheet 18 gauge with reinforced at center with hooked type locks
Delivery tubes
Seed and fertilizer plastic tubes 3 mm wall thickness, transparent flexible, fixed with clamp on both sides seed and fertilizer metering device
Fluted Rollers
Nylon stator and brush
Roller drive shaft
M.S. round 22 mm
Seed rate
Adjustable through calibrated slide lever
Rotor shaft bearing
02 Nos. UCF-208 sealed with grease filling facility
Seed and fertilizer shaft bearings
02 Nos. UCL-205 sealed with grease filling facility
Miscellaneous
Paint
Double coat with primer after the surface finish
Bearings (New)
NTN, SKF, NSK, or equivalent
Nuts and bolts
To be tightened with spring washers
Lubrication
Filled with proper lubrication of PSO lubricant of requisite grade and quantity
Reviews
There are no reviews yet.