88 mm dia. M.S. pipe, 8 mm wall thickness 100 x 50 x 6 mm M.S. box, 4 mm M.S. sheet 50 x 6 mm M.S. flat, 12 and 10 mm M.S. plate 60 mm dia. M.S. pipe
Mast (A hitch)
12 mm & 6 mm M.S. plate and support of 22 mm dia. M.S. round
Depth control wheel
8 x 38 x 4 mm (male), 50 x 50 x 4.5 mm (female) M.S. box with 18 mm dia. M.S. rod for adjustment and with supports of 380 x 75 x 10 mm M.S. flat and 6 mm M.S. sheet
Press wheel
Made from a 2 mm sheet bolted with 60 mm dia. 3 mm wall thickness M.S. pipe with axle ends for bearing
Cutting disc
02 Nos. 550 mm dia. 6 mm thick with bearing hub having a width and depth adjustment
Cutting blades
10 Nos. 350 x 75 x 10 mm leaf springs and 01 No. 390 x 255 x 9 mm M.S. sheet at Center, bolted with 30 x 30 mm M.S. square rod welded with 38 x 38 mm M.S. sq. rod and main frame
Gearbox
C.I. drive on both sides through 40 mm M.S. shaft mounted on 9 mm & 6 mm M.S. sheet
Wheel
400 mm dia. 100 mm wide made from M.S. formed sheet 2.0 mm pressed
Wheel shaft
50 x 50 x 4.5 mm M.S. box with the axle at ends
Conveyor (1st)
2200 mm long and 1350 mm wide 60 mm dia. with wall thickness 6 mm M.S. pipe with 38 mm M.S. shaft and 30 mm over-lapped with conveyor of flat belt 70 mm wide riveted with spring carbon steel rod 12 mm dia. a space of 35 mm in two sections having 04 Nos. sprockets at end 200 mm dia. with face width 40 mm at end 04 Nos. sprocket came type at center 04 Nos. sprockets 120 mm dia. with face width 40 mm at lower
Conveyor (2nd)
2200 mm long and 1350 mm wide 60 mm dia. with wall thickness 4.5 mm M.S. pipe with 30 mm dia. M.S. shaft with the same size of sprockets over-lapping with a flat belt and spring steel rods riveted with it
Reviews
There are no reviews yet.