A tractor for Tanzania should be specified around the field conditions and the full route from port to farm. Maize and cotton cultivation, rice-related field work and produce transport can place very different demands on the same machine. MFI supplies Millat Massey Ferguson tractors from Pakistan and prepares quotations using the buyer’s model, implement and destination requirements.
Massey Ferguson tractors available for Tanzania
The table compares the current MFI catalogue’s main 50–85 HP options. Engine horsepower is one part of the selection: traction, implement power demand, field access and service planning are equally useful details for a quotation. Listed models remain subject to availability confirmation for the order.
| Model | HP | Drive | Main use to discuss | Export price |
|---|---|---|---|---|
| MF 240 | 50 | 2WD | Mixed-farm utility and lighter tillage | USD 9,350 |
| MF 260 | 60 | 2WD | Tillage and general farm work | USD 10,900 |
| MF 360 | 60 | 2WD | Cultivation and farm transport | USD 11,650 |
| MF 360 | 60 | 4WD | Traction-focused cultivation | USD 17,700 |
| MF 375 | 75 | 2WD | Field preparation and trailer work | USD 14,650 |
| MF 375 | 75 | 4WD | Tillage where traction is important | USD 19,950 |
| MF 385 | 85 | 2WD | Higher-power field and transport work | USD 15,200 |
| MF 385 | 85 | 4WD | Higher-power work on difficult ground | USD 20,300 |
Current export price — subject to confirmation at quotation date. These published tractor prices are not landed-cost quotations. Confirm model, configuration, availability and the named shipment terms with MFI. Freight, insurance, destination taxes, clearance, port charges and inland delivery must be quoted separately where applicable. Implement suitability depends on the actual specification and working conditions.
Tractor export prices for Tanzania
The published USD tractor figures above are a starting point for machine selection. Ask for a written breakdown of tractor, implements, packing, ocean freight and any agreed insurance. Clearance and onward transport after arrival should be budgeted separately with the responsible providers. The final offer must state its validity and named delivery terms; there is no fixed Tanzania landed price on this page.
Select horsepower around the job
MF 375 for Tanzania
Compare the MF 375 2WD 75 HP tractor for cultivation and transport when a 75 HP 2WD tractor matches the proposed equipment. For maize or other field crops, send the implement type, working width and soil description. If the same tractor must pull a trailer, specify the loaded trailer and travel route rather than choosing by engine power alone.
MF 385 for Tanzania
The MF 385 2WD 85 HP tractor and MF 385 4WD 85 HP tractor are 85 HP options. They let a buyer compare the cost and traction requirements of 2WD and 4WD without confusing the two configurations. Larger equipment still needs a compatibility check; a higher HP figure does not establish that a particular planter, plough or hydraulic attachment is suitable.
MF 360 4WD for Tanzania
The MF 360 4WD 60 HP tractor offers 60 HP with four-wheel drive. Discuss it when traction is important but the intended equipment does not require the higher engine-power range. Give details of the field surface and tyre requirements before comparing it with a 75 or 85 HP model.
Rice fields, dry cultivation and 2WD versus 4WD
A rice enquiry should explain whether the tractor will work on dry prepared land, moist soil or flooded ground. Do not assume a standard tractor configuration is suitable for puddling or waterlogged ground without confirmation of the required tyres, equipment and operating conditions. For maize or cotton cultivation on firm fields, compare the implement demand and seasonal workload. For farm transport, assess trailer braking, load and route conditions separately.
Agricultural implements
Build the equipment list around the sequence of work: primary cultivation, seedbed preparation, planting, crop care and transport. MFI’s implements range includes options for discussion such as ploughs, harrows, tillers, planters, sprayers and trailers. Confirm PTO speed and power, three-point linkage, hydraulic demand and working dimensions for the chosen tractor. Include spares and wear parts in the same packing enquiry where useful.
Shipping tractors to Dar es Salaam
For a Tanzania shipment, identify Dar es Salaam as the receiving port and provide the actual inland delivery town or farm location. Confirm the model mix, tyres, implements and packing method before a container plan is priced. Your clearing and transport agent should plan unloading, any reassembly and onward delivery. MFI will confirm current freight and carrier schedules for the proposed shipment; no transit time or container quantity is guaranteed here.
How to order from MFI
- Send the model, drive type, quantity, field applications and implement list.
- Confirm destination port, final delivery location, buyer details and expected purchasing date.
- Review the proforma invoice for the exact configuration, USD prices, inclusions, exclusions and shipment terms.
- Agree the packing, document and inspection requirements before the order is finalized.
Documents and spare parts
Review export shipping and documents with your clearing agent. The required import approvals, taxes and clearance arrangements must be confirmed for the current shipment. For service planning, request parts supply from Pakistan using the exact model and identification details; availability is confirmed per part.
Request a quotation for Tanzania
Tell MFI whether the main work is maize, rice, other field crops or transport. Include the intended implements, ground conditions, preferred tractor, quantity, Dar es Salaam shipment requirement and final inland destination.
Contact MFI for a current export quotation. MFI supplies from Pakistan; the quotation will confirm the exact machine, packing plan and agreed commercial terms.
Export buyer resources
Tractor export models · Agricultural implements · Spare parts support · Shipping and documents · Africa and other export markets