CHISEL PLOW (3 TINES)

CHISEL PLOW (3 TINES)

$ 550.00

The Chisel Plow is primary tillage deep plow, working up to 20″ to ensure the development of the crop root system at proper depth and environment. It is an ideal implement where the topsoil is fertile but the subsoil is not productive. The Chisel Plough increases the natural fertility of soil as deep tillage provides enough circulation of air, moisture, and sunlight into the soil.

Description

CHISEL PLOW (3 TINES)

The Chisel Plow is the primary tillage deep plow, working up to 20″ to ensure the development of the crop root system at proper depth and environment. It is an ideal implement where the topsoil is fertile but the subsoil is not productive. The Chisel Plow increases soil’s natural fertility as deep tillage provides enough air, moisture, and sunlight circulation into the soil.

For full penetration in the first pass, a 50 to 85-hp tractor would be required. A medium (50 hp) tractor will plow 12″ in the first pass and a full 20″ depth will be attained in the second pass.

With only one central tine fitted it can work as a subsoiler and up to maximum depth for breaking off the hard pan even with a 50-hp tractor. Yield per acre can be increased considerably by deep plowing for wheat, cotton, and sugar cane crops. Best fruit orchard growth is ensured by deep tillage before tree plantation. In rain-fed areas, the Chisel Plow is an ideal implement because without disturbing topsoil it shatters the subsoil portion of land, maintaining moisture for longer periods and safe-guarding against water and wind erosion of top soils.

 

Specifications:

  1. Heavy steel box V-type frame without any nut and bolt.
  2. They are easily replaceable tines that penetrate up to 20″ without much effort.
  3. Shovels are easily replaceable.
  4. Working width 1.20 Meters.
  5. Tractor compatibility 50 – 85 HP.

 

General
Type Mounted box frame type
No. of Tines 03
Tractor power requirement 50 hp or above
Tine spacing (adjustable) 380 mm and 675 mm
Overall Dimensions
Length 750 mm
Height 1300 mm
Width 1400 mm
Material Specifications
Main V-frame 1400 × 110 × 6 mm, made from M.S. formed sheet, box type
Mast A-frame 12 mm M.S. plate, 100 mm wide, Integral with supports
Hitch Bracket 18 – 20 mm thick M.S. plate made to ride on or penetrate in the frame then welded
Tine 820 × 180 × 30 mm M.S. plate with three depth adjustment grooves 50 – 75 mm apart
Cutting wedge on tine 400 × 30 × 50 mm hardened steel
Shovel (replaceable) 265 × 60 × 30 mm hardened steel
Tine pins 100 × 25 mm M.S. round
Tine boxes 05 Nos. made from 6 mm thick M.S. sheet at least 165 mm deep with pin-hole and reinforcement wedges at top and bottom to accommodate tines with max. Clearance of 1 – 2 mm
Parking stand 01 No. M.S. box or G.I. pipe of 40 mm
Miscellaneous
Paint Double coat with primer after surface finish
Nuts and bolts To be tightened with spring washers
Modifications To be carried out free of cost, if required
Warranty Free: 1 year for parts and service
Extended: 5 years for parts supply on payment

Reviews

There are no reviews yet.

Be the first to review “CHISEL PLOW (3 TINES)”

Your email address will not be published.