ROTAVATOR (48 BLADES)

ROTAVATOR (48 BLADES)

SKU: R(B100 Category:

Description

ROTAVATOR (48 BLADES)

 

General
Type Mounted
Linkage category I & II
Working width 1825 mm
Tractor power 50 hp or above
Power transmission system Gear train with lubrication housing and cover
No. of Blades 48
Blade spacing 225 mm
U.J. shaft 01 Nos.
Rotor speed (min.) 230 – 245 rpm @ 540 PTO speed
Overall Dimensions (Min.)
Length 1000 mm
Width 2150 mm
Height 1000 mm
Material Specifications
Frame 01 No. M.S. box of 75 x 75 x 5 mm with 02 Nos. supports of 12 mm
Mast (A-frame) M.S. sheet metal 5 mm with reinforced front ends 02 Nos 50 x 6 mm M.S. flat
Blades rotor pipe Seamless steel pipe o.d. 87 mm wall thickness 6 mm with forged axle end of 60 mm
Blades mounting plates 08 or 09 Nos. 235 mm dia., 10 – 12 mm thick, and 02 nos. I 50 mm dia. On sides (optional)
Gearbox Cast iron or cast steel
Transmission shaft 60 mm alloy steel with a safety cover of 87 mm o.d. and 5 mm wall thickness
Blades L-shaped, forged, heat treated, 5 – 6 mm thick, HRC 40 – 50
Sheet Metal

Top cover

Side plates

Rear cover

Skids

 

3 – 4 mm M.S. reinforced at bends

10 mm M.S.

3 – 4 mm M.S.

62 x I5 mm M.S. flat

Bearings

Gearbox (PTO side)
Gearbox (pinion side)
Gearbox (Prop. shaft side)
Gear train (upper)
Gear train (idler)
Gent train (lower)

 

01 No. 7310 or 6309
01 No. 7515 or 32212
01 No. 7218 or 32211
01 No. 7311 or 32210
02 Nos. 6309 or 32210
01 No.6312 or 6213

Rotor shaft (free end) 01 No. 7512 or 6312
Gears Heat treated, steel gears
Parking stand G.I. or steel pipe
Miscellaneous
Paint Double coat with primer after the surface finish
Bearings (New) European Standard
Nuts and bolts To be tightened with spring washers
Modifications To be carried out free of cost, if required
Warranty Free: 1 year for parts and service

Extended: 5 years for parts supply on payment

Download Specifications In PDF File:

👉 Rotavator (48 Blades) (Specifications)

Reviews

There are no reviews yet.

Be the first to review “ROTAVATOR (48 BLADES)”

Your email address will not be published. Required fields are marked *