HAPPY SEEDER

HAPPY SEEDER

Description

HAPPY SEEDER

General
Application For sowing of wheat crop in rice stubble field after combine harvesting
Type of Machine Tractor rear mounted
Linkage type Car-II
Number of rows 10
Row spacing 200 – 225 mm adjustable
Seed and Fertilizer box Placed above the main frame and fixed with rotor side plates
Seedbox capacity 60 kg
Fertilizer box capacity 60 kg
Universal shaft Improved quality
Rotor (Knives/cutter) M.S.
Gearbox ratio 1:1.72
Effective field capacity 0.75 acre/h
Field efficiency 65 %
Overall Dimensions
Overall Width 2387 mm ± 100 mm
Working Width 2235 mm ± 100 mm
Front two back length 1525 mm ± 100 mm
Height 1400 mm ± 100 mm
Weight (Approx.) 660 kg ± 10kg
Material Specifications
Tins Holding Frame M.S. box 75 × 75 × 6 mm welded with M.S. plate on both ends and bolted with side sheets
Side plates 6 mm M.S. plate on both sides
Rotor Shield sheet 16 Gauge welded with side plates, angle iron box on the front side, and M.S. strip at the back-side
Rotor shaft (drum) M.S. Pipe 2235 mm ± 50 mm long, o.d. 140 mm ± 10 mm with all thickness 5 mm, both portions of box top covered with trays, hinges, box sheet thickness of M.S. 18 SWG
Cutter blade/flails 20 pairs y type (40 blades) 2-knives welded with bush and pivoted with high tensile bolt 12 mm with lock nuts on the rotor in 4 rows at alternate intervals
Knife size 150 x 50 x 6 mm (spring steel) sharp edge on both sides, HRC ≥ 40
Tines and shanks 10 Nos. cast iron molded 16 mm thickness arc-type towards the front cutter blades with a sharp edge and shoe-type furrow openers (hardened steel) are bolted at their bottom
Tine clamps 20 Nos. of 10 mm U-shaped spring steel clamps with nut and spring washer
Depth control 02 Nos. of tires size as per manufacturer standard for tines depth control
Power transmission Light-weight gear box hinged with the bottom plate of 1:1.72 ratio and rotor RPM 1200 to 1350 with air vent nipple and bearing with proper oil seals at both shaft (drive and driven) transmission M.S. shaft of 60 mm dia. Triple grooved pulleys at transmission and rotor shaft with C3 type belts with proper belt adjuster. M.S. 16 SWG sheet cover for belts
Seed-cum fertilizer box M.S. sheet 18 SWG 2335 mm long trapezoidal shape divided equally into two box halves, box side width 5 l0 mm, height 250 mm & length
Boxes lids M.S. sheet 18 Gauge with reinforced at center with hooked type locks
Boxes mounting With M.S. side plates of the machine on both sides
Delivery tubes Seed and Fertilizer plastic tubes (min. 3 mm wall thickness), transparent flexible, fixed with clamp on both side seed and fertilizer metering device
Fluted Rollers Nylon stator and brush
Roller drive shaft M.S. round 22 mm
Seed rate Adjustable through calibrated slide lever
Bearing Sealed with grease filling facility
Rotor shaft bearing 02 Nos. UCF-210
Gearbox bearing 04 Nos. or more accordingly
Seed and fertilizer shaft bearings 02 Nos. UCL-205
Miscellaneous
Paint Double coat with primer after the surface finish
Bearings (New) NTN, SKF, NSK, or equivalent
Nuts and bolts To be tightened with spring washers
Lubrication Filled with proper lubrication of PSO lubricant of requisite grade and quantity
Minor modifications To be carried out free of cost if required
Warranty Free: 1 year for parts and service

Extended: 5 years for parts supply on payment

Reviews

There are no reviews yet.

Be the first to review “HAPPY SEEDER”

Your email address will not be published.